GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Medical Equipment Cable Jacket TPEs

Medical Equipment cable Jacket TPEs

ATP's TPE plastic thermoplastic elastomer series

1. Authoritative certification:

passed ISO10993 "bio-compatibility" test;

2. Safety and reliability:

Pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH,1000Hrs) test;

3. Gentle touch:

Compared with TPU cable sheath, TPEs cable sheath presents a softer touch;

4. High-cost performance ratio:

low density (≤0.95), high processing efficiency, the best solution for discarded medical cable sheath.

Technical Data of Medical Equipment Cable Jacket TPEs

Technical Data SheetModel

Material Properties
Test Standard
Test Condition
Unit
2560F-ESU-2514S
General Characteristics
Material Category
---
Appearance(Light/Semi-matte/Frosted)---
Extrusion/Injection
---
Physical CharacteristicsHardnessISO 4815SShore A55
ProportionISO 1183-g/cm³0.939
Melt IndexISO 1133-1:2011190℃/2.16kgg/10min0.7
Brittle TemperatureISO 812-
Mechanical Properties
ElongationISO37:2017200mm/min%424
Tensile StrengthISO37:2017200mm/minMpa5.24
Tearing StrengthISO34-1:2015500mm/minKN/m
Hot Air AgingElongation Retention RateISO37:2017-%
Tensile Strength Retention RateISO37:2017-%
Electrical Performance
Volume ResistivityASTM D257-Ohm-cm
PermittivityASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature


Key Benefits of Medical Equipment cable Jacket TPEs

Key Benefits of Medical Equipment cable Jacket TPEs

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Medical Equipment Cable Jacket TPEs

ATP Polymer News Recommendation

08 May, 2023
Analysis of Uses and Advantages of TPU Materials
TPU Materials combine mechanical strength, chemical resistance, and flexibility. TPU materials provide flexibility, durability, resilience, toughness, stain resistance, and colorability. These are jus...
07 May, 2023
Molecular Structure of TPU Materials
TPU is a type of (AB)n segmented linear polymer. A refers to a polyester or polyether with a high molecular weight (1000-6000), and B refers to a diol containing 2-12 straight chain carbon atoms. The ...
06 May, 2023
Overview of the TPU Materials Overmoulding Process
TPU materials encapsulation is actually a secondary molding process of TPU encapsulated hard (or soft) resin, which usually includes body (hard resin, such as PC/ABS, ABS PA PA66 PS hardware parts and...
05 May, 2023
Things to Remember When TPU Injection Molding
Material Drying for TPU Injection MoldingDue to its high hygroscopicity and susceptibility to hydrolysis, insufficiently dried TPU materials can result in processing difficulties and cause the injecti...
04 May, 2023
What Are the Key Points of TPU Injection Molding?
TPU Injection MoldingThe most suitable method for processing TPU is a screw-type injection molding machine. A single screw with a typical length and a three-section screw can produce well-plasticized ...
03 May, 2023
Application of Thermoplastic Polyurethane Elastomer in New Energy Vehicles
As a new environmentally friendly material, thermoplastic polyurethane elastomer (TPU) combines the advantages of rubber and plastic and has a wide range of applications, including nearly 20 categorie...