GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

High Temperature-resistance TPEE

High Temperature-resistance TPEE

A Series 125 Heat ℃ -Resistance HFFR TPU&TPEs

Applied Fields: HFFR wire & cable with UL 125℃ heat-resistance level.

Characteristics:

1. Heat-resistance Level:125℃;

2. Flame retardant: 1.5mm V0, support VW-1/FT-4;

3. Physical Properties: can support wire & cable to pass UL1581/758/62 and non-migration test;

4. Surface effect: fine and smooth surface and soft-touch feel without heterogeneous, pits, whiten, sticky and etc. defects can return gloss, matte and semi-matte surface effect through control of die temperature.

5. Good Printable

High surface tension and polarity, can apply the main halogen-free ink to obtain good adhesion and scratch resistance, stand by UL2556.

6. Easy Processing

High efficiency and processing performance, can achieve 60~100m/min rate using the same size extruder of PVC, and decrease the probabilities of the cast, pellet, bulge, pits, etc. common defects significantly.

7. Stable Quality

Long-term experience of R&D processing and application based on ISO9000 and 14000 quality systems.

Technical Data of High Temperature-resistance TPEE

Technical Data SheetModelModel

Material Properties
Test Standard
Test Condition
Unit


General Characteristics
Material Category
---

Appearance(light/Semi-matte/Frosted)---

Extrusion/Injection
---

Physical CharacteristicsHardnessISO 4815SShore A

ProportionISO 1183-g/cm³

Melt IndexISO 1133-1:2011190℃/2.16kgg/10min

Brittle TemperatureISO 812-

Mechanical PropertiesElongationISO37:2017200mm/min%

Tensile StrengthISO37:2017200mm/minMpa

Tearing StrengthISO34-1:2015500mm/minKN/m

Hot Air AgingElongation Retention RateISO37:2017-%

Tensile Strength Retention RateISO37:2017-%

Electrical Performance
Volume ResistivityASTM D257-Ohm-cm

PermittivityASTM D150--

Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-

Oxygen IndexASTM D2863-%

Feature


Key Benefits of High Temperature-resistance TPEE

Key Benefits of High Temperature-resistance TPEE

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
High Temperature-resistance TPEE

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...