GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

TPU for Smart Wearer Cable

Intelligent Wearable Device Material Solution

Thermoplastic Polyurethane Structure

1. UL certification: UL yellow card certification V0 grade polyether tpu material (yellow card number: E353106), adequately support conventional data line pass UL758/1581 VW-1 combustion test.

2. Hydrolysis resistance: adequately support the cable pass 1000Hrs high temperature and humidity test (85℃/85%,1000Hrs).

3. Environmental resistance: Fully support the environmental and life long testing of cables through oil resistance (IRM902, 60℃, 168Hrs), chemical resistance, mildew resistance, etc

4. Heat Resistance: Fully support the cable pass UL 758/1581 80℃/105℃heat resistance test (113℃/136℃, 168Hrs).

5. Excellent mechanical properties: fully support the wire pass all kinds of rocking, resilient recovery, and other tests.

6. Advanced Appearance: Unique extinction formula makes the cable present a very even and fine frosted surface (fog surface) appearance, with advanced texture and touch; the best solution for high-end consumer electronic products cable.


TPU for Smart Wearer Cable


TPU for Smart Wearer Cable Datasheet

 


Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
TPU for Smart Wearer Cable

Related ATP Polymer Compounds' Markets

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...