GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

TPU for Medical Equipment Cable Jacket

Medical Equipment Cable Jacket Material Solution

TPU Jacket Material

1. Authoritative certification:

passed ISO10993 "bio-compatibility" test (authoritative verification report attached);

2. Safety and reliability:

pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH,1000Hrs) test;

3. Outstanding Elasticity:

In lower hardness condition ≤80A, the tpu polymer shows excellent elastic modulus, which is very suitable for medical slingshot line sheath application;

4. Excellent touch:

By introducing rubber functional groups into the material, the medical cable sheath presents a very soft and smooth silicone handle and an even & fine matte appearance.


TPU Jacket Material


TPE Jacket Material

1. Authoritative certification:

passed ISO10993 "bio-compatibility" test;

2. Safety and reliability:

pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH,1000Hrs) test;

3. Gentle touch:

Compared with TPU cable sheath, TPEs cable sheath presents a softer touch;

4. High-cost performance ratio:

low density (≤0.95), high processing efficiency, the best solution for discarded medical cable sheath.


Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
TPU for Medical Equipment Cable Jacket

Related ATP Polymer Compounds' Markets

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...