GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

ATPolymer In Vehicle Cables

ATP's material polymer with good oil-resistance,excellent Properties of Hot air aging.

ATP For EV Charging Cable

ATP specialty compounds on EV charging cable have started research and development for new energy electric vehicles since 2015. Our product meets the operation of charging pile cable under various climatic conditions. Its products and technologies have served well-known companies manufacturing vehicles, such as Tesla, BMW & Xpeng, etc.

ATP For EPB Harness Bushing

ATP's TPU compounds of EPB Harness Bushing was approved by Volkswagen through TLS29 standard test.

ATP For High Voltage Wire Harness

Based on TPU/TPO/XLPE compounds, fully support in-car high-voltage wire harness through temperature resistance and flame retardant test.

ATP For In-Car Sensor Wire Harness & ABS Brake Line

TPU compounds solution for In-Car Sensor Wire Harness & ABS brake line, support cable passing ISO6722 flame retardant test.
Vehicle Cables
ATP Polymer News Recommendation
08 May, 2023
Analysis of Uses and Advantages of TPU Materials
TPU Materials combine mechanical strength, chemical resistance, and flexibility. TPU materials provide flexibility, durability, resilience, toughness, stain resistance, and colorability. These are jus...
07 May, 2023
Molecular Structure of TPU Materials
TPU is a type of (AB)n segmented linear polymer. A refers to a polyester or polyether with a high molecular weight (1000-6000), and B refers to a diol containing 2-12 straight chain carbon atoms. The ...
06 May, 2023
Overview of the TPU Materials Overmoulding Process
TPU materials encapsulation is actually a secondary molding process of TPU encapsulated hard (or soft) resin, which usually includes body (hard resin, such as PC/ABS, ABS PA PA66 PS hardware parts and...
05 May, 2023
Things to Remember When TPU Injection Molding
Material Drying for TPU Injection MoldingDue to its high hygroscopicity and susceptibility to hydrolysis, insufficiently dried TPU materials can result in processing difficulties and cause the injecti...
04 May, 2023
What Are the Key Points of TPU Injection Molding?
TPU Injection MoldingThe most suitable method for processing TPU is a screw-type injection molding machine. A single screw with a typical length and a three-section screw can produce well-plasticized ...
03 May, 2023
Application of Thermoplastic Polyurethane Elastomer in New Energy Vehicles
As a new environmentally friendly material, thermoplastic polyurethane elastomer (TPU) combines the advantages of rubber and plastic and has a wide range of applications, including nearly 20 categorie...