GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Silane Crosslinking LSZH

Silane Crosslinking LSZH

Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not only can be quickly cross-linked under warm water cooking conditions but also can be naturally placed at room temperature for cross-linking without additional irradiation processing, which makes Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material more widely used.

Through the radiation cross-linking process, the wire and cable can achieve the effect of flame retardant UV irradiate LSZH, which is suitable for large-scale and high-efficiency mass production of thin-walled insulation layers of wire and cables.

The Flame retardant grade pass IEC60332 Single vertical cable combustion test and Bunched cables combustion test.

Technical Data of Silane Crosslinking LSZH

Technical Data SheetModel
ItemsMaterial PropertiesTest StandardTest ConditionUnit
Physical CharacteristicsHardnessISO 4815SShore A
ProportionISO 1183-g/cm³
Brittle TemperatureISO 812-
Mechanical PropertiesTensile StrengthICE 60811-501200mm/min%
ElongationICE 60811-501200mm/minMpa
Hot Air AgingTensile Strength Retention RateISO37:2017-%
Elongation Retention RateISO37:2017-%
Electrical PerformanceVolume ResistivityASTM D257-Ohm-cm
Dielectric StrengthASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Smoke Density(With Fale)ASTM D2863-%
Feature





Key Benefits of Silane Crosslinking LSZH

Key Benefits of Silane Crosslinking LSZH

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Silane Crosslinking LSZH

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...