GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

ATPolymer In Network Cable

ATP has a Large-scale bunched cables combustion test laboratory, providing seamless service for customers' large-scale combustion tests.

ATP For CPR Optical Fiber Jacket

ATP applied to the network cable of high flame retardant LSFH series products (Fire Defender "SERIES), supported various specifications of network cable products (CAT5~CAT8), launched a new generation of upgraded LSOH materials for Network cables.
CPR Optical Fiber Jacket Solution CPR Optical Fiber Jacket Solution
CPR Flame Retardant Network Cables CPR Flame Retardant Network Cables
IEC grade Flame Retardant Network Cables IEC grade Flame Retardant Network Cables
Network Cable
Related ATP Polymer's Compounds
Co-developed with ATP's customers to cater the most pressing needs of today and tomorrow
TPU
TPU
Extruding TPU Flame Retardant TPU Injection Molding TPU UV-resisitance TPU Anti-static TPU High Temperature-resistance TPU Anti-mildew TPU
LSZH
LSZH
Extruding LSZH Hight Flame Retardant LSOH Silane Crosslinking LSZH Injection Molding LSZH High Wear-resistance LSZH Irradiation cross-linking LSZH High Hardness LSFH
TPEs
TPEs
Extruding/Under Extruding TPEs Flame Retardant TPEs Injection Molding TPEs UV-resisitance TPEs Anti-static TPEs High Temperature-resistance TPEs Anti-Mildew TPEs
TPO
TPO
Extruding/Under Extruding TPO Flame Retardant TPO Injection Molding TPO UV-resisitance TPO Anti-static TPO High Temperature-resistance TPO Anti-Mildew TPO
TPEE
TPEE
Extruding/Under Extruding TPEE UV-resisitance TPEE Injection Molding TPEE Anti-static TPEE High Temperature-resistance TPEE Anti-Mildew TPEE Microbial-resistance TPEE
ATP Polymer News Recommendation
08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
Learn More
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
Learn More
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
Learn More
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
Learn More
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
Learn More
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...
Learn More