GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

High Hardness LSFH

High Hardness LSFH

All or part of the insulation layer, sheath, outer sheath, and auxiliary materials (taping and filling) of halogen-free low-smoke flame-retardant cables are halogen-free cross-linked polyethylene (XLPE) flame-retardant materials, not only Has better flame retardant properties, and no halogen acid gas is released when the cable is burned.

The smoke generation of the cable is also small, and the corrosive gas generated by the combustion of the cable is also a compromise between the flame retardancy and the reduction of the halogen acid gas generation. The low-halogen low-smoke flame-retardant cable is developed. Its halogen content is about 1/3 of that of halogen-containing flame retardant cables. Smoke production is also close to accepted "low smoke" levels

Technical Data of High Hardness LSFH

Technical Data SheetModel
ItemsMaterial PropertiesTest StandardTest ConditionUnit5632-ERH-0152S
Physical CharacteristicsHardnessISO 4815SShore A59
ProportionISO 1183-g/cm³1.496
Brittle TemperatureISO 812-
Mechanical PropertiesTensile StrengthICE 60811-501200mm/min%160
ElongationICE 60811-501200mm/minMpa16.9
Hot Air AgingTensile Strength Retention RateISO37:2017-%
Elongation Retention RateISO37:2017-%
Electrical PerformanceVolume ResistivityASTM D257-Ohm-cm
Dielectric StrengthASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature





Key Benefits of High Hardness LSFH

Key Benefits of High Hardness LSFH

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
High Hardness LSFH

ATP Polymer News Recommendation

08 May, 2023
Analysis of Uses and Advantages of TPU Materials
TPU Materials combine mechanical strength, chemical resistance, and flexibility. TPU materials provide flexibility, durability, resilience, toughness, stain resistance, and colorability. These are jus...
07 May, 2023
Molecular Structure of TPU Materials
TPU is a type of (AB)n segmented linear polymer. A refers to a polyester or polyether with a high molecular weight (1000-6000), and B refers to a diol containing 2-12 straight chain carbon atoms. The ...
06 May, 2023
Overview of the TPU Materials Overmoulding Process
TPU materials encapsulation is actually a secondary molding process of TPU encapsulated hard (or soft) resin, which usually includes body (hard resin, such as PC/ABS, ABS PA PA66 PS hardware parts and...
05 May, 2023
Things to Remember When TPU Injection Molding
Material Drying for TPU Injection MoldingDue to its high hygroscopicity and susceptibility to hydrolysis, insufficiently dried TPU materials can result in processing difficulties and cause the injecti...
04 May, 2023
What Are the Key Points of TPU Injection Molding?
TPU Injection MoldingThe most suitable method for processing TPU is a screw-type injection molding machine. A single screw with a typical length and a three-section screw can produce well-plasticized ...
03 May, 2023
Application of Thermoplastic Polyurethane Elastomer in New Energy Vehicles
As a new environmentally friendly material, thermoplastic polyurethane elastomer (TPU) combines the advantages of rubber and plastic and has a wide range of applications, including nearly 20 categorie...