GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Hight Flame Retardant LSOH

Hight Flame Retardant LSOH

1. High flame-retardant performance:

Fully support the optical cable through the EN 50575:2014+A1:2016 B2ca, Cca, Dca level test (different product models meet different CPR level requirements);

Very effective total heat release and heat release rate peak control scheme. The carbonization efficiency is higher. When burning, the table surface can be quickly charred to form an effective fiber protective layer; the generation of smoke during combustion and the release of halogen acid gas are also in full compliance with the CPR regulations;

2. Safety and reliability:

Fully support the cable through environmental resistance test as follows;

Passed high temperature cracking test (YD/T1113 100°C, 96H, no crackle on the surface);

Pass the high-temperature aging test (100°C, 168H, tensile strength and elongation change rate ≤ 30%);

Pass the -25°C low-temperature shock test.

3. Good wear resistance:

Better wear and scratch resistance under same test conditions;

4. Easier processing:

Fully meet the high-speed extrusion of optical cables; the wire diameter is round and stable, less flow (less die deposit), good color stability, higher processing yield rate.

5. Stable performance and quality:

The product batch stability and uniformity are guaranteed.

Key Benefits of Hight Flame Retardant LSOH

Key Benefits of Hight Flame Retardant LSOH

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Hight Flame Retardant LSOH

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...