Ⅰ. The performance, use and molding precautions of thermoplastic PE (polyethylene)1. The properties and uses of PE (polyethylene)PE, there are many kinds of high-density polyethylene (low-pressure po...
Thermoplastics and thermosets are types of plastics that undergo different production processes and produce various properties depending on the constituent materials and production methods. Thermoplas...
Ⅰ. Wide application of polyethylene cableWith the widespread use of social electricity, the application of cables has also become wider. Since the photoelectric wire is easy to cause fire, the cables...
Ⅰ. Structural properties of olefinsThe molecular structural formula of monoolefin is CnH2n, C2-C4 is a gas at room temperature, it is a non-polar molecule, insoluble or slightly soluble in water. Hyd...
Ⅰ. Olefin plus protonic acid reactionAlkenes can carry out addition reactions with protonic acids: CH2=CH2+HX→CH3CH2X.Characteristics:1. Different olefins support regularityWhen the alkene is a diff...
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...
The TPV we are talking about here is a dynamically vulcanized thermoplastic elastomer composed of PP+EPDM. It is not difficult to understand that the fluidity of the entire TPV is provided by polyprop...
1. If the surface of TPR thermoplastic rubber products is strictly required, it must be dried before injection moldingGenerally, it is hopper drying at 70~80℃/2h or tray drying at 80~100℃/1h. For tr...
ATP's Easy-peel series products are a series of special polymer alloy materials specially developed for the characteristics of multi-core microbeam optical cables mainly used in Europe that require manual and rapid peeling during construction and wiring.
1. What is cross-linked polyethylene?Cross-linked polyethylene is to use chemical or physical methods to change the molecular structure of polyethylene from linear to three-dimensional network structu...
1. How does cross-linked polyethylene work?Cross-linked polyethylene uses high-density polyethylene as the main raw material. Through the action of high-energy rays or chemical initiators, the linear ...
The physical properties of cross-linked polyethylene cables are significantly changed after being cross-linked by silane.1. The heat resistance of cross-linked polyethylene cable is improvedSince the ...
The peroxide chemical cross-linking method is that the peroxide is decomposed by heat to form a free radical with high chemical activity, the free radical captures the hydrogen atom in the polyethylen...
1. Characteristics of silane cross-linked polyethylene insulating materialsThe silane crosslinking method includes two processes of grafting and crosslinking. The grafting reaction is that the initiat...
It is an influential and authoritative brand exhibition in the wire and cable industry in South China, and it is also the vane of the global cable, wire and processing equipment industry, and has been...
1. TPU Mechanical PropertiesTPU has many excellent mechanical properties:Excellent wear resistance:The Taber wear value of TPU is 0.35-0.5mg, which is the smallest among plastics. Adding lubricant can...
1. TPU OverviewTPU is a mature environmental protection material with excellent characteristics of high tension, strong toughness and aging resistance. At present, TPU has been widely used in medical ...
With the rapid development of the rubber and plastic industry, thermoplastic elastomer TPE gradually replaces the application fields of PVC, rubber, and silica gel. TPE material has excellent weathera...
1. Cross Linked Polyethylene OverviewPolyethylene (PE) crosslinking technology is one of the important means to improve its material properties. The cross-linked modified PE can greatly improve the pr...
ATP attened the first UL International Wire and Cable Exhibition in Dongguan.With more than 500 exhibitors, 25 seminars, and more than 100 years of international experience, UL is committed to ...
Underwriter Laboratories (UL) is one of the oldest safety certification companies around. They certify products, facilities, processes or systems based on industry-wide standards.From raw materials an...
The first plant of ATP Polymer is in the city's Dongguan Industrial Park to produce thermoplastic polymers, which is used in wire & cable in 2007.The second plant was invested more than US$20 ...
Since the Civil Building Regulation GB51348-2019 was formally promulgated and implemented on August 10, 2020, B1 and B2 wire and cable are gradually becoming the mainstream products in China's civ...
China Shanghai International Cable Industry Exhibition (WireShow), as an extremely important international cable and wire professional exhibition in China and even in Asia, is committed to creating ...
The mission of ATP Polymer R & D Center promotes innovation and development with high-performance polymers, based on maintaininging to health, safety, and environment. The R & D Center designs...