GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

CPR Optical Fiber Jacket Solution

1. High flame-retardant performance:

Fully support the optical cable through the EN 50575:2014+A1:2016 B2ca, Cca, Dca level test (different product models meet different CPR level requirements);

Very effective total heat release and heat release rate peak control scheme. The carbonization efficiency is higher. When burning, the table surface can be quickly charred to form an effective fiber protective layer; the generation of smoke during combustion and the release of halogen acid gas are also in full compliance with the CPR regulations;

2. Safety and reliability:

ATPolymer tpu manufacturer provides products that fully support the cable through environmental resistance test as follows;

Passed high temperature cracking test (YD/T1113 100°C, 96H, no crackle on the surface);

Pass the high-temperature aging test (100°C, 168H, tensile strength and elongation change rate ≤ 30%);

Pass the -25°C low-temperature shock test.

3. Good wear resistance:

Better wear and scratch resistance under same test conditions;

4. easier processing:

Fully meet the high-speed extrusion of optical cables; the wire diameter is round and stable, less flow (less die deposit), good color stability, higher processing yield rate.

5. Stable performance and quality:

The product batch stability and uniformity are guaranteed.


CPR Jacket Material–LSZH


CPR Jacket Material–LSZH Datasheet

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
CPR Optical Fiber Jacket Solution

Related ATP Polymer Compounds' Markets

ATP Polymer News Recommendation

08 May, 2023
Analysis of Uses and Advantages of TPU Materials
TPU Materials combine mechanical strength, chemical resistance, and flexibility. TPU materials provide flexibility, durability, resilience, toughness, stain resistance, and colorability. These are jus...
07 May, 2023
Molecular Structure of TPU Materials
TPU is a type of (AB)n segmented linear polymer. A refers to a polyester or polyether with a high molecular weight (1000-6000), and B refers to a diol containing 2-12 straight chain carbon atoms. The ...
06 May, 2023
Overview of the TPU Materials Overmoulding Process
TPU materials encapsulation is actually a secondary molding process of TPU encapsulated hard (or soft) resin, which usually includes body (hard resin, such as PC/ABS, ABS PA PA66 PS hardware parts and...
05 May, 2023
Things to Remember When TPU Injection Molding
Material Drying for TPU Injection MoldingDue to its high hygroscopicity and susceptibility to hydrolysis, insufficiently dried TPU materials can result in processing difficulties and cause the injecti...
04 May, 2023
What Are the Key Points of TPU Injection Molding?
TPU Injection MoldingThe most suitable method for processing TPU is a screw-type injection molding machine. A single screw with a typical length and a three-section screw can produce well-plasticized ...
03 May, 2023
Application of Thermoplastic Polyurethane Elastomer in New Energy Vehicles
As a new environmentally friendly material, thermoplastic polyurethane elastomer (TPU) combines the advantages of rubber and plastic and has a wide range of applications, including nearly 20 categorie...