GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

UV-resisitance TPEE

UV - resisitance TPEE

Applied Fields:

HFFR wire & cable with stable, long-term UV resistance properties can pass UL105℃/90℃ heat-resistance level.

Characteristics:

1. UV resistance property: long-term, stable UV resistance property, E<1 (0.35W/m2, 340nm, 4H/60℃&4H/50℃, 48h/168h) after 48h/168h radiation;

2. Heat-resistance Level: 105/80℃;

3. Flame Retardant Level: 1.5mm V0, support VW-1;

4. Physical characteristics: can support wire & cable to pass UL 1581/758/62 test and non-migration test;

5. Surface effect: fine and smooth surface and soft-touch feel without heterogeneous, pits, whiten, sticky and etc. defects, can return gloss, matte and semi-matte surface effect through control of die temperature.

Technical Data of UV-resisitance TPEE

Technical Data SheetModel

Material Properties
Test Standard
Test Condition
Unit
3090B-RSU-1007T
General Characteristics
Material Category
---
Appearance(light/Semi-matte/Frosted)---
Extrusion/Injection
---
Physical CharacteristicsHardnessISO 4815SShore A94
ProportionISO 1183-g/cm³1.242
Melt IndexISO 1133-1:2011190℃/2.16kgg/10min10.6
Brittle TemperatureISO 812-
Mechanical Properties
ElongationISO37:2017200mm/min%540
Tensile StrengthISO37:2017200mm/minMpa18.234
Tearing StrengthISO34-1:2015500mm/minKN/m
Hot Air AgingElongation Retention RateISO37:2017-%
Tensile Strength Retention RateISO37:2017-%
Electrical Performance
Volume ResistivityASTM D257-Ohm-cm
PermittivityASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature


Key Benefits of UV- resisitance TPEE

Key Benefits of UV- resisitance TPEE

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
UV-resisitance TPEE

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...