GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Alternative energy and Mining Cable

TPU for Mining Cable

1. Permanent anti-static modification (≤ 10^8Ω), tinting supported;

2. The introduction of special polar polymer into TPU for Mining cable, greatly improve the bonding strength between TPU and polyester pipe while applied on Surface coating and bonding of Polyester Pipe, which makes it difficult to peel off;

3. The introduction of rubber functional groups into tpu compounds and LSZH for Rail Transit Cables to participate in blending modification, provide better low-temperature hardening performance than untreated TPU. In the application of pipes and cables with higher requirements for low-temperature flexibility, it shows better softness and flexibility than the untreated ones by the same low-temperature conditions;

4. Excellent hydrolysis resistance: pass the harshest test in the industry: 2000 Hrs hydrolysis resistance test (85℃/85%RH,2000Hrs)


TPU Jacket Material


TPU Jacket Material Datasheet

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Alternative energy and Mining Cable

Related ATP Polymer Compounds' Markets

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...