GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Anti-mildew TPU

Anti-Mildew TPU

Authoritative certified mold-resistant materials: through the military standard mold resistance test (GJB150.10), an alternative to CNAS.

1. UL certified V0 grade polyether TPU:

UL94-V0 (1.5mm) flame retardant grade, fully support the conventional structural cable through the theIEC60332-1-2 single vertical burning test;

2. Extremely small high and low-temperature shrinkage rate, shrinkage rate ≤1% in high and low-temperature cycle test;

3. High security and reliability, support fiber optic cable through various environmental tests and life tests:

4. High wear resistance:

Polar material, high cohesive energy, and wear resistance are much better than conventional low-smoke halogen-free polyolefin materials (LSZH);

5. Excellent processing performance:

Fully meet the requirements of cable jacket filling, semi-filling, empty pipe extrusion, and high-speed ultra_x005f thin wall (≤0.1mm, 80-200m/min)extrusion requirements. high yield rate, and low degradation performance such as runny, broken skin, granules, coarse hemp, mold marks, and stereotypes.

6. Advanced appearance:

The even and delicate frosted surface (matte surface) not only makes the cable wear-resistant, reliable high-quality texture but also suitable for the extinction requirements of military optical cables." most used in Military&Aerospace cables.


Technical Data of Anti-mildew TPU

Technical Data SheetModel

Material Properties
Test Standard
Test Condition
Unit
1185D-ENB-1414S
General Characteristics
Material Category
---
Appearance(Light/Semi-matte/Frosted)---
Extrusion/Injection
---
Physical CharacteristicsHardnessISO 4815SShore A85
ProportionISO 1183-g/cm³1.185
Melt IndexISO 1133-1:2011190℃/2.16kgg/10min9.6
Brittle TemperatureISO 812-
Mechanical Properties
ElongationISO37:2017200mm/min%492
Tensile StrengthISO37:2017200mm/minMpa26.1
Tearing StrengthISO34-1:2015500mm/minKN/m
Hot Air AgingElongation Retention RateISO37:2017-%
Tensile Strength Retention RateISO37:2017-%
Electrical Performance
Volume ResistivityASTM D257-Ohm-cm
PermittivityASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature


Key Benefits of Anti-Mildew TPU

Key Benefits of Anti-Mildew TPU

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Anti-mildew TPU

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...