GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

UV-resisitance TPU

UV resisitance TPU

SER—V Series UV Resistant HFFR TPU(105/℃ 80℃Heat-Resistance)

Applied Fields:

HFFR wire & cable with stable, long-term UV resistance property can pass UL105 /90 ℃ ℃ heat-resistance level.

Characteristics:

1. UV resistance property: long-term, stable UV resistance property, E △ <1(0.35W/m2, 340nm, 4H/60 &4H/50 ℃ ℃, 48h/168h)after 48h/168h radiation;

2. Heat-resistance Level: 105/80℃;

3. Flame Retardant Level: 1.5mm V0, support VW-1;

4. Physical characteristics: can support wire & cable to pass UL 1581/758/62 test and non-migration test;

5. Surface effect: fine and smooth surface and soft-touch feel without heterogeneous, pits, whiten, sticky and etc. defects can return gloss, matte and semi-matte surface effect through control of die temperature.

Technical Data of UV-resisitance TPU

Technical Data SheetModel

Material PropertiesTest StandardTest ConditionUnit1185D-EMS-1186S
General CharacteristicsMaterial Category---
Appearance (Light/Semi-matte/Frosted)---
Extrusion/Injection---
Physical CharacteristicsHardnessISO 4815SShore A82
ProportionISO 1183-g/cm³1.263
Melt IndexISO 1133-1:2011190℃/2.16kgg/10min10.5
Brittle TemperatureISO 812-
Mechanical PropertiesElongationISO37:2017200mm/min%442
Tensile StrengthISO37:2017200mm/minMpa24.9
Tearing StrengthISO34-1:2015500mm/minKN/m
Hot Air AgingElongation Retention RateISO37:2017-%
Tensile Strength Retention RateISO37:2017-%
Electrical PerformanceVolume ResistivityASTM D257-Ohm-cm
PermittivityASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature


Key Benefits of UV resisitance TPU

Key Benefits of UV resisitance TPU

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
UV-resisitance TPU

ATP Polymer News Recommendation

21 Dec, 2022
Thermoplastics PE (polyethylene) and PS (polystyrene)
Ⅰ. The performance, use and molding precautions of thermoplastic PE (polyethylene)1. The properties and uses of PE (polyethylene)PE, there are many kinds of high-density polyethylene (low-pressure po...
14 Dec, 2022
What is the Difference Between Thermosets and Thermoplastics?
Thermoplastics and thermosets are types of plastics that undergo different production processes and produce various properties depending on the constituent materials and production methods. Thermoplas...
17 Nov, 2022
What is the Difference Between Polyethylene Insulation, Polyvinyl Chloride Insulation and Cross-linked Polyethylene Insulation?
Ⅰ. Wide application of polyethylene cableWith the widespread use of social electricity, the application of cables has also become wider. Since the photoelectric wire is easy to cause fire, the cables...
10 Nov, 2022
Olefins Are Raw Materials for What Products? What is Its Nature?
Ⅰ. Structural properties of olefinsThe molecular structural formula of monoolefin is CnH2n, C2-C4 is a gas at room temperature, it is a non-polar molecule, insoluble or slightly soluble in water. Hyd...
20 Oct, 2022
Analysis of the Reaction of Olefin Plus Protonic Acid and Hypohalous Acid
Ⅰ. Olefin plus protonic acid reactionAlkenes can carry out addition reactions with protonic acids: CH2=CH2+HX→CH3CH2X.Characteristics:1. Different olefins support regularityWhen the alkene is a diff...
08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...