GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

ATPolymer In Optical Fiber

ATP's lszh and tpu materials Under the condition of high flame retardant performance, it still has excellent processing characteristics and high quality. The product fully meets the test requirements of the EU CPR EN50575 safety level (B2ca, Cca, Dca, Eca)

ATP For Communication Optical Fiber

After long-term repeated optimization of raw material selection, formulation design, unique patented lubrication technology, and the introduction of high flowing elastomeric polymer to participate in blending modification, the material performance fully meets low smoke halogen-free material standard requirements for IEC60332-1-2 (single vertical), YD/T1113, GB/T32129 and other optical cable performance test.
Application of LSZH GB31247 Flame Retardant Optical Cable Application of LSZH GB31247 Flame Retardant Optical Cable
LSZH Application of CPR Flame Retardant Optical Cable LSZH Application of CPR Flame Retardant Optical Cable
LSZH Application of IEC Flame Retardant Optical Cable LSZH Application of IEC Flame Retardant Optical Cable
TPU Application of IEC Flame Retardant Optical Cable TPU Application of IEC Flame Retardant Optical Cable
LSZH Application of Special Optical Cable LSZH Application of Special Optical Cable
LSZH /TPEE Application of Tight Buffer for Optical Cable LSZH /TPEE Application of Tight Buffer for Optical Cable
Communication Optical Fiber

Related ATP Polymer's Compounds

Co-developed with ATP's customers to cater the most pressing needs of today and tomorrow
TPU
TPU
Extruding TPU Flame Retardant TPU Injection Molding TPU UV-resisitance TPU Anti-static TPU High Temperature-resistance TPU Anti-mildew TPU
LSZH
LSZH
Extruding LSZH Hight Flame Retardant LSOH Silane Crosslinking LSZH Injection Molding LSZH High Wear-resistance LSZH Irradiation cross-linking LSZH High Hardness LSFH
TPEs
TPEs
Extruding/Under Extruding TPEs Flame Retardant TPEs Injection Molding TPEs UV-resisitance TPEs Anti-static TPEs High Temperature-resistance TPEs Anti-Mildew TPEs
TPO
TPO
Extruding/Under Extruding TPO Flame Retardant TPO Injection Molding TPO UV-resisitance TPO Anti-static TPO High Temperature-resistance TPO Anti-Mildew TPO
TPEE
TPEE
Extruding/Under Extruding TPEE UV-resisitance TPEE Injection Molding TPEE Anti-static TPEE High Temperature-resistance TPEE Anti-Mildew TPEE Microbial-resistance TPEE

ATP Polymer News Recommendation

17 Nov, 2022
What is the Difference Between Polyethylene Insulation, Polyvinyl Chloride Insulation and Cross-linked Polyethylene Insulation?
Ⅰ. Wide application of polyethylene cableWith the widespread use of social electricity, the application of cables has also become wider. Since the photoelectric wire is easy to cause fire, the cables...
Learn More
10 Nov, 2022
Olefins Are Raw Materials for What Products? What is Its Nature?
Ⅰ. Structural properties of olefinsThe molecular structural formula of monoolefin is CnH2n, C2-C4 is a gas at room temperature, it is a non-polar molecule, insoluble or slightly soluble in water. Hyd...
Learn More
20 Oct, 2022
Analysis of the Reaction of Olefin Plus Protonic Acid and Hypohalous Acid
Ⅰ. Olefin plus protonic acid reactionAlkenes can carry out addition reactions with protonic acids: CH2=CH2+HX→CH3CH2X.Characteristics:1. Different olefins support regularityWhen the alkene is a diff...
Learn More
08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
Learn More
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
Learn More
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
Learn More