GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

FAQ

ATP has been committed to the research and development of new environmentally friendly polymer materials and solutions

ATP has been committed to the research and development of new environmentally friendly polymer materials and solutions

What can polymer be used for?

ATP's polymers is mainly used for the wire and cables which used in new energy vehicles, medical equipment, robots, 5G communications, building wiring, rail transit, military aerospace, intelligent wear, consumer electronics, and other hot areas.

TPU, LSZH, LSOH, TPU Compounds, LSFH, OHLS
What can polymer be used for?
What can polymer be used for?
What are the 3 main types of polymers?

There are 3 principal classes of polymers – thermoplastics, thermosets, and elastomers. Differentiation between these classes is best defined by their behaviour under applied heat. Thermoplastic polymers can be either amorphous or crystalline.

TPU, LSZH, LSOH, TPU Compounds, LSFH, OHLS
What are the 3 main types of polymers?
What are the 3 main types of polymers?
What is your main product?

ATP's main products are TPU, TPEs, TPEE, TPAE, LSZH, XLPE, etc.

TPU, LSZH, LSOH, TPU Compounds, LSFH, OHLS
What is your main product?
What is your main product?
What is your main product?

Our main products are TPU, TPEs, LSZH, TPEE, TPAE, XLPE, XLPO, etc

TPU, LSZH, LSOH, TPU Compounds, LSFH, OHLS
What is your main product?
What is your main product?
Do you have R&D team?

Yes, our R&D Center area is more than 1000 Sq.m. we have the TUV Rheinland Authorized Testing Laboratory, which is also the VDE Recommended CPR Pre-test Laboratory.

TPU, LSZH, LSOH, TPU Compounds, LSFH, OHLS
Do you have R&D team?
Do you have R&D team?
What is your MOQ and lead time?

Normaly, our MOQ is 1 ton, it need to double confirm with our sales team. the lead time is about 30-40 days.

TPU, LSZH, LSOH, TPU Compounds, LSFH, OHLS
What is your MOQ and lead time?
What is your MOQ and lead time?
Do you make custom products?

Yes, ATP's custom polymer compounds are designed to meet the needs of your unique application, The ATP team will work to understand the demands of your application to effectively design and manufacture your custom compounds.

TPU, LSZH, LSOH, TPU Compounds, LSFH, OHLS
Do you make custom products?
Do you make custom products?
FAQ
Recommend
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...