GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

High Wear-resistance LSZH

High Wear-resistance LSZH

The insulating layer and sheath of the halogen-free low-smoke flame-retardant cable have better flame-retardant properties, and the smoke generation of the cable is also small and the toxicity is low. The price of halogen-free low-smoke flame-retardant cables is higher.

The flame retardant cable is a cable in which the sample is burned under the specified test conditions. After the test-fire source is removed, the spread of the flame is only within a limited range, and the residual flame or residual burning can be extinguished within a limited time.

Its fundamental characteristic is: in the event of a fire, it may burn out and become inoperable, but it can prevent the spread of fire. In layman's terms, in the event of a fire in the cable, it can control the combustion to a local area without spreading, and protect other various equipment to avoid greater losses.

Technical Data of High Wear-resistance LSZH

Technical Data SheetModel
ItemsMaterial PropertiesTest StandardTest ConditionUnit5632G-ERD-0115S
Physical CharacteristicsHardnessISO 4815SShore A53
ProportionISO 1183-g/cm³1.52
Brittle TemperatureISO 812--40
Mechanical PropertiesTensile StrengthICE 60811-501200mm/min%170
ElongationICE 60811-501200mm/minMpa15
Hot Air AgingTensile Strength Retention RateISO37:2017-%-11
Elongation Retention RateISO37:2017-%-7
Electrical PerformanceVolume ResistivityASTM D257-Ohm-cm9.388*10^11Ω·m
Dielectric StrengthASTM D150--33.81
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-pass
Oxygen IndexASTM D2863-%36

Key Benefits of High Wear-resistance LSZH

Key Benefits of High Wear-resistance LSZH

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Contact No
Product type
Application type
Enquiry Message
High Wear-resistance LSZH

ATP Polymer News Recommendation

08 May, 2023
Analysis of Uses and Advantages of TPU Materials
TPU Materials combine mechanical strength, chemical resistance, and flexibility. TPU materials provide flexibility, durability, resilience, toughness, stain resistance, and colorability. These are jus...
07 May, 2023
Molecular Structure of TPU Materials
TPU is a type of (AB)n segmented linear polymer. A refers to a polyester or polyether with a high molecular weight (1000-6000), and B refers to a diol containing 2-12 straight chain carbon atoms. The ...
06 May, 2023
Overview of the TPU Materials Overmoulding Process
TPU materials encapsulation is actually a secondary molding process of TPU encapsulated hard (or soft) resin, which usually includes body (hard resin, such as PC/ABS, ABS PA PA66 PS hardware parts and...
05 May, 2023
Things to Remember When TPU Injection Molding
Material Drying for TPU Injection MoldingDue to its high hygroscopicity and susceptibility to hydrolysis, insufficiently dried TPU materials can result in processing difficulties and cause the injecti...
04 May, 2023
What Are the Key Points of TPU Injection Molding?
TPU Injection MoldingThe most suitable method for processing TPU is a screw-type injection molding machine. A single screw with a typical length and a three-section screw can produce well-plasticized ...
03 May, 2023
Application of Thermoplastic Polyurethane Elastomer in New Energy Vehicles
As a new environmentally friendly material, thermoplastic polyurethane elastomer (TPU) combines the advantages of rubber and plastic and has a wide range of applications, including nearly 20 categorie...