GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Flame Retardant TPEs

Flame Retardant TPEs

Technical Data of Flame Retardant TPEs

Technical Data SheetModel

Material Properties
Test Standard
Test Condition
Unit
2285B-ESS-1262S
General Characteristics
Material Category---
Appearance(Light/Semi-matte/Frosted)---
Extrusion/Injection
---
Physical Characteristics
HardnessISO 4815SShore A84
ProportionISO 1183-g/cm³1.05
Melt IndexISO 1133-1:2011190℃/2.16kgg/10min0.1
Brittle TemperatureISO 812-
Mechanical Properties
ElongationISO37:2017200mm/min%428
Tensile StrengthISO37:2017200mm/minMpa12.412
Tearing StrengthISO34-1:2015500mm/minKN/m
Hot Air AgingElongation Retention RateISO37:2017-%
Tensile Strength Retention RateISO37:2017-%
Electrical Performance
Volume ResistivityASTM D257-Ohm-cm
PermittivityASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature


Key Benefits of Flame Retardant TPEs

Key Benefits of Flame Retardant TPEs

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Flame Retardant TPEs

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...