GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

High Temperature-resistance TPEs

High Temperature-resistance TPEs

Halogen-free Flame Retardant TPE FFC/AC power Cable Solutions

Application fields: the jacket and insulation of a variety of flexible flat cables(FFC)and AC power cables needing to pass the UL VW-1 test.

Product features:

1. UL94 V0 vertical burning, in full support of the cable to pass the UL VW-1 test;

2. In support of the cable products every item corresponding test and the thermal deformation and non-migration test of UL1581/758/62;

3. In full support of the cable to pass UL 80℃/105℃ temperature resistance test;

4. Electric property: excellent electric property, in full support of the cable product passing every item corresponding electric test of UL1581/758/62;

5. Appearance: natural glossy, well comfortable, and smooth without the common imperfections of TPE materials such as tackiness and ash sticking, etc;

6. Excellent processing efficiency and property, not only just using PVC screw machine, it can realize the productive efficiency of sixty to hundred meters per minute, but also appears very few imperfections in during processing such as salivation, particles, bumps, and pockmarks, etc.

Technical Data of High Temperature-resistance TPEs

Technical Data SheetModel

Material PropertiesTest Standard
Test Condition
Unit
2895F-ESS-2519S
General Characteristics
Material Category---
Appearance(Light/Semi-matte/Frosted)---
Extrusion/Injection
---
Physical CharacteristicsHardnessISO 4815SShore A95
ProportionISO 1183-g/cm³0.902
Melt IndexISO 1133-1:2011190℃/2.16kgg/10min3.3
Brittle TemperatureISO 812-
Mechanical Properties
ElongationISO37:2017200mm/min%521
Tensile StrengthISO37:2017200mm/minMpa21.36
Tearing StrengthISO34-1:2015500mm/minKN/m
Hot Air AgingElongation Retention RateISO37:2017-%
Tensile Strength Retention RateISO37:2017-%
Electrical Performance
Volume ResistivityASTM D257-Ohm-cm
PermittivityASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature


Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
High Temperature-resistance TPEs

ATP Polymer News Recommendation

21 Dec, 2022
Thermoplastics PE (polyethylene) and PS (polystyrene)
Ⅰ. The performance, use and molding precautions of thermoplastic PE (polyethylene)1. The properties and uses of PE (polyethylene)PE, there are many kinds of high-density polyethylene (low-pressure po...
14 Dec, 2022
What is the Difference Between Thermosets and Thermoplastics?
Thermoplastics and thermosets are types of plastics that undergo different production processes and produce various properties depending on the constituent materials and production methods. Thermoplas...
17 Nov, 2022
What is the Difference Between Polyethylene Insulation, Polyvinyl Chloride Insulation and Cross-linked Polyethylene Insulation?
Ⅰ. Wide application of polyethylene cableWith the widespread use of social electricity, the application of cables has also become wider. Since the photoelectric wire is easy to cause fire, the cables...
10 Nov, 2022
Olefins Are Raw Materials for What Products? What is Its Nature?
Ⅰ. Structural properties of olefinsThe molecular structural formula of monoolefin is CnH2n, C2-C4 is a gas at room temperature, it is a non-polar molecule, insoluble or slightly soluble in water. Hyd...
20 Oct, 2022
Analysis of the Reaction of Olefin Plus Protonic Acid and Hypohalous Acid
Ⅰ. Olefin plus protonic acid reactionAlkenes can carry out addition reactions with protonic acids: CH2=CH2+HX→CH3CH2X.Characteristics:1. Different olefins support regularityWhen the alkene is a diff...
08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...