GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

High Wear-resistance TPU

High Wear-resistance TPU

Fully support the wire pass all kinds of rocking, resilient recovery, and other tests. passed over 50000 wear-resisting tests, effectively preventing EV cable from wearing and cracking caused by repeated dragging under cement and sand conditions for a long time.

General Characteristics:

1. Environmental Friendly

HFFR materials completely comply with RoHS, REACH, Halogen-free, Phthalate (16P) Dimethyl Fumarate, PFO&PFOS, TBBPA, PAHs, EN71, etc. regulations, and rules.

2. Outstanding Flame Retardant

UL94 5VA-V0 (1.5mm) level, can firmly support wire and tube pass CSA FT-4, UL VW-1 and etc.

3. Excellent Physical Properties

UL 80℃-125℃ heat-resistance can firmly support wire & cable to pass UL 1581/758/62 and non- migration test, the properties are beyond the reference values of flexible wire standards.

4. Perfect-Surface Effect

Fine and smooth appearance and soft-touch feel, resolve the common defects such as heterogeneous, pits, whiten, sticky and etc.

5. Good Printable

High surface tension and polarity, can apply the main halogen-free ink to obtain good adhesion and scratch resistance, stand by UL2556.

6. Easy Processing

High efficiency and processing performance, can achieve 60~100m/min rate using the same size extruder of PVC and decrease the probabilities of the cast, pellet, bulge, pits, etc. common defects significantly.

7. Stable Quality

Long-term experience of R&D processing and application based on ISO9000 and 14000 quality systems.

Technical Data of High Wear-resistance TPU

Technical Data SheetModel

Material Properties
Test Standard
Test Condition
General Characteristics
Material Category---
Physical CharacteristicsHardnessISO 4815SShore A90
ProportionISO 1183-g/cm³1.128
Melt IndexISO 1133-1:2011190℃/2.16kgg/10min10
Brittle TemperatureISO 812-
Mechanical Properties
Tensile StrengthISO37:2017200mm/minMpa48.53
Tearing StrengthISO34-1:2015500mm/minKN/m
Hot Air AgingElongation Retention RateISO37:2017-%
Tensile Strength Retention RateISO37:2017-%
Electrical Performance
Volume ResistivityASTM D257-Ohm-cm
PermittivityASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%

Key Benefits of High Wear-resistance TPU

Key Benefits of High Wear-resistance TPU

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Contact No
Product type
Application type
Enquiry Message
High Wear-resistance TPU

ATP Polymer News Recommendation

21 Dec, 2022
Thermoplastics PE (polyethylene) and PS (polystyrene)
Ⅰ. The performance, use and molding precautions of thermoplastic PE (polyethylene)1. The properties and uses of PE (polyethylene)PE, there are many kinds of high-density polyethylene (low-pressure po...
14 Dec, 2022
What is the Difference Between Thermosets and Thermoplastics?
Thermoplastics and thermosets are types of plastics that undergo different production processes and produce various properties depending on the constituent materials and production methods. Thermoplas...
17 Nov, 2022
What is the Difference Between Polyethylene Insulation, Polyvinyl Chloride Insulation and Cross-linked Polyethylene Insulation?
Ⅰ. Wide application of polyethylene cableWith the widespread use of social electricity, the application of cables has also become wider. Since the photoelectric wire is easy to cause fire, the cables...
10 Nov, 2022
Olefins Are Raw Materials for What Products? What is Its Nature?
Ⅰ. Structural properties of olefinsThe molecular structural formula of monoolefin is CnH2n, C2-C4 is a gas at room temperature, it is a non-polar molecule, insoluble or slightly soluble in water. Hyd...
20 Oct, 2022
Analysis of the Reaction of Olefin Plus Protonic Acid and Hypohalous Acid
Ⅰ. Olefin plus protonic acid reactionAlkenes can carry out addition reactions with protonic acids: CH2=CH2+HX→CH3CH2X.Characteristics:1. Different olefins support regularityWhen the alkene is a diff...
08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...