GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

TPE for Power Cable

TPE for Power Cable


Applicable fields: all kinds of flexible flat cables (FFC) that need to pass the UL VW-1 test, outer quilts, and core wires of AC power cords.

Features of TPE for Power Cable:

1. UL 94 V0 grade, fully support the wire to pass the UL VW-1 flame retardant test;

2. Fully support wire products to pass UL1581/758/62 corresponding tests and thermal deformation and non-migration tests;

3. Fully support the wire to pass the UL 80°C/105°C temperature resistance level test;

4. Excellent electrical performance, fully support wire products to pass the corresponding electrical tests of UL1581/758/62;

5. Appearance feel: natural luster, dry and smooth, no deterioration such as sticky hand and sticky ash that are common in types of tpe materials;

6. Processing characteristics: excellent processing efficiency and processing performance, the production efficiency of 60-100 meters per minute can be achieved by using the same PVC screw machine, and Deterioration such as salivation, particles, bulging, and pitting rarely occurs during processing.

Commonality of TPE for Power Cable:

1. Environmental performance: fully meet the requirements of internationally accepted environmental protection directives such as RoHS (REV.2.0), REACH regulations, SVHC substances, and GP;

2. Environmental resistance characteristics: According to the application requirements of customers, without changing the above basic performance, anti-UV and other characteristics can be added.

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
TPE for Power Cable

Related ATP Polymer Compounds' Markets

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...