GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Low Temperature-resistance LSZH

Low Temperature-resistance LSZH

Features of cable use LSFH material:

1. Flame retardant properties

In addition to flame retardancy, low-smoke halogen-free flame-retardant cable material has the characteristics of low smoke, halogen-free, low corrosion, and low toxicity compared with halogen-containing flame-retardant cable materials.

2. The anti-expansion strength is greater than that of general PVC wires: the anti-expansion strength of general PVC wires is greater than 1.05Kgf/mm2, while the anti-expansion strength of low-smoke halogen-free wires is greater than 1.2Kgf/mm2;

3. It has excellent high-temperature resistance, and the working temperature for a long time can reach 150 ℃, and it is softer than ordinary PVC wires (hardness is 80-90);

4. It is non-migratory, and it will not produce toxic gas and a lot of black smoke when burning;

5. The volume resistivity is relatively high: ordinary PVC wires are generally 1012~1015Ω/cm3, and low-smoke halogen-free wires are higher than 1016Ω/cm3;

6. It has excellent high-voltage resistance characteristics: the withstand voltage of ordinary polyvinyl chloride wires is above 10KV, while the withstand voltage of low-smoke halogen-free wires can reach above 15KV;

7. Has excellent flame retardancy; and long service life, the service life can reach 100 year

Technical Data of Low Temperature-resistance LSZH

Technical Data SheetModelModel

Material Properties
Test Standard
Test Condition
Unit


General Characteristics
Material Category
---

Appearance(Light/Semi-matte/Frosted)---

Extrusion/Injection
---

Physical CharacteristicsHardnessISO 4815SShore A

ProportionISO 1183-g/cm³

Melt IndexISO 1133-1:2011190℃/2.16kgg/10min

Brittle TemperatureISO 812-

Mechanical Properties
ElongationICE 60811-501200mm/min%

Tensile StrengthICE 60811-501200mm/minMpa

Tearing StrengthISO34-1:2015500mm/minKN/m

Hot Air AgingElongation Retention RateISO37:2017-%

Tensile Strength Retention RateISO37:2017-%

Electrical Performance
Volume ResistivityASTM D257-Ohm-cm

PermittivityASTM D150--

Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-

Oxygen IndexASTM D2863-%

Feature


Key Benefits of Low Temperature-resistance LSZH

Key Benefits of Low Temperature-resistance LSZH

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Low Temperature-resistance LSZH

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...