GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Super Soft LSZH

Super Soft LSZH

Soft low-smoke halogen-free material refers to elastic material with a hardness in the range of 75 to 85 (shoreA) (the hardness of ordinary halogen-free material is around 95. As the hardness of the material decreases, the physical and mechanical properties of the product, heat-resistant deformation Performance, flame retardant performance, etc. will be affected to a certain extent. Mainly suitable for some occasions with flexibility requirements, such as elevator flat cables, large square car cables, electronic wires with high flexibility requirements, etc.

Technical Data of Super Soft LSZH

Technical Data SheetModel
ItemsMaterial PropertiesTest StandardTest ConditionUnit5622G-DRR-0036S
Physical CharacteristicsHardnessISO 4815SShore A37
ProportionISO 1183-g/cm³1.47
Brittle TemperatureISO 812--40
Mechanical PropertiesTensile StrengthICE 60811-501200mm/min%250
ElongationICE 60811-501200mm/minMpa10
Hot Air AgingTensile Strength Retention RateISO37:2017-%-17
Elongation Retention RateISO37:2017-%-5
Electrical PerformanceVolume ResistivityASTM D257-Ohm-cm10.271*10^11Ω·m
Dielectric strengthASTM D150--30.53
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-pass
Oxygen IndexASTM D2863-%35
Feature





Key Benefits of Super soft LSZH

Key Benefits of Super soft LSZH

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Super Soft LSZH

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...