GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

LSZH Application of Special Optical Cable

High Hardness Tight Packing Material- LSZH

1. High hardness:

Hardness ≥58D, more suitable for tight/sleeve characteristics;

2. Good liquidity:

Fully meet the fiber tight/sleeve thin wall high speed (≥150m/min), long_x0002_term stable processing requirements, the wire diameter being round and stable;

3. Less flow:

The unique patented lubrication technology makes the material have few processing defects such as flow, broken skin, broken wire, and particles during the high-speed extrusion.


Low Friction Jacket Material - LSZH

Low friction coefficient lszh jacket material, easy for on-site construction of fiber optic cable.


Conventional Jacket Material - LSZH

1. High cost-performance:

After long-term repeated optimization of raw material selection, formulation design, unique patented lubrication technology, and the introduction of high_x005f flowing elastomeric polymer to participate in blending modification, the material has better mass production reliability and good product rate at the same price;

material performance fully meets the low-smoke halogen-free material standard requirements for YD/T1113, GB/T 32129 cable, and electric cable;

2. Excellent flame retardant:

Fully support the conventional structural optic cable through IEC60332-1-2 (single vertical), YD/T1113, GB/T32129, and other optical cable performance test requirements;

3. Safety and reliability:

Fully support the cable through high and low-temperature aging, UV aging, and high temperature cracking test;

4. Good Wear Resistance:

Better wear and scratch resistance under the same test conditions;

5. Easier processing:

Fully meet the high-speed extrusion requirements of optical cable, the wire diameter round and stable, less flow ( less die deposit), good color stability, higher yield rate;

6. Stable performance and quality:

The product batch stability and uniformity are guaranteed

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
LSZH Application of Special Optical Cable

Related ATP Polymer Compounds' Markets

ATP Polymer News Recommendation

08 Sep, 2022
About Thermoplastic Rubber
Ⅰ. How is thermoplastic rubber formed?Thermoplastic rubber is a new type of material that can be plasticized at high temperature and can show rubber elasticity at low temperature.Such materials have ...
22 Aug, 2022
Why is Thermoplastic Rubber TPV Easy to Agglomerate?
Ⅰ. Usually thermoplastic rubber elastomers are easier to agglomerate, and the reasons for agglomeration are as follows:1. If the hardness is too low, such as materials close to 0 degrees, it is usual...
15 Aug, 2022
What Should Be Paid Attention to Before Thermoplastic Rubber Injection Molding Process?
1. The barrel needs to be cleaned before thermoplastic rubber injection moldingBefore the newly purchased injection molding machine is used, or when the product needs to be changed, the raw material i...
08 Aug, 2022
Filling, Packing and Cooling of Thermoplastic Rubber Injection Moulds
Ⅰ. Filling of thermoplastic rubber injection molding process moldsIn the process of molding and filling the mold cavity, if the filling performance of the product is not good, the pressure drop is to...
01 Aug, 2022
Type Analysis of Thermoplastic Rubbers
Thermoplastic rubber transcends the traditional boundaries of rubber and plastic in industrial production, and brings new changes to the development of the rubber industry. The emerging thermoplastic ...
22 Jul, 2022
TPV Blow Molding Guide for Thermoplastic Rubber
Thermoplastic polyolefin elastomer based on EPDM+PP, material hardness: Shore A92±3; it can be molded like thermoplastics, such as polyethylene, polypropylene, etc., by injection molding, extrusion, ...